Daikin BRC1D71, Operation Manual

BRC1D71
Remote controller
3P166742-1

Operation manual

8

ADDITIONAL FEATURES OF THE CONTROLLER

1

AWAY

Press the TIME 

 and TIME 

 buttons

simultaneously to enable the AWAY function.

2

Adjusting the air flow direction

Use the AIR FLOW DIRECTION button to adjust the
air flow direction. Press the button to switch between
fixed or variable air flow direction. Use the 

 icon

to determine the fixed air flow direction by pressing
the AIR FLOW DIRECTION button when the 
icon indicates the desired direction.

3

SCHEDULE TIMER

All features and operation and programming of the
schedule timer are described below.

Schedule timer operation

In schedule timer operation, the installation is also
controlled by the schedule timer. The actions
programmed in the schedule timer will be executed
automatically.

The schedule timer always executes the last
command; this means the user can temporarily
overrule the last executed programmed action. Refer
to "Manual operation" on page 6. The next

programmed action (in the schedule timer) will return
control to the schedule timer.

Use the SCHEDULE button to enable or disable the
schedule timer.

To set up the SCHEDULE TIMER refer to chapter 6.
"Programming the schedule timer" on page 11.

KEEP IN MIND THAT THE 
BUTTON MUST BE OFF TO GUARANTEE
TRIGGERING OF THE AWAY FUNCTION.

Do not use the AWAY mode, in case of VRV
system.

NOTE

Even if fixed air flow direction is selected,
variable air flow direction can be enabled
automatically to preserve proper
operation of your installation.

NOTE

The schedule timer overrules the

 button, only use the

SCHEDULE button to enable or disable

the schedule timer. The schedule timer is

enabled when the 

 icon is  visible.  The

 button only overrules the

schedule timer until the next programmed

action.

The programmed schedule is time driven.
Make sure that the clock and day of the week
are set correctly. Refer to "CLOCK SETTING
FUNCTION" on page 5.

Manually adjust the clock for summertime
and wintertime. Refer to "CLOCK SETTING
FUNCTION" on page 5.

A power failure exceeding 1 hour will reset
the clock and the day of the week. Refer to
"CLOCK SETTING FUNCTION" on page 5
to adjust the clock and the day of the week.

The actions programmed in the schedule
timer will not be lost after a power failure;
reprogramming the schedule timer is not
required.

✦✷✤✩✩✪✧✥-✤_✲N.❇m ✷❂❈❆ ✫ ✻❉❑❍s❅❂❖, O❄❏o❃❆❍ ✩, ✥✣✣55:✥✫ ✷M