background image

ED72-975

Operation Manual

BRC1E61

13

3P243520-1

English

CAUTION

Do not sit or stand on any unstable base at the time of operating or  

Ɣ

maintaining the air conditioner.

The base may topple down and injury may result.

Do not touch the motor at the time of fi

 lter 

replacement.

 

Ɣ

The motor in operation is at high temperatures and a burn may result.

Do not wash the air conditioner with water, as this may result in electric  

Ɣ

shocks or fi

 re. 

Perform ventilation from time to time. 

Ɣ

Be careful when using the air conditioner with other heating equipment.

Insuffi

 cient ventilation may result in oxygen defi

 ciency.

Always stop the operation of the air conditioner and turn OFF the  

Ɣ

breaker at the time of cleaning.

Failure to do so may result in an electric shock or injury

.

Do not wash the interior of the indoor and outdoor units by yourself.  

Ɣ

Always consult your Daikin dealer

.

The use of an incorrect washing method or incorrect detergent may damage the resin 

parts of the indoor unit or cause water leakage.

Moreover

, malfunctions, smoke generation, or ignition may result if the electric parts or 

motor in the indoor unit is wet with detergent.

Do not place objects in direct proximity of the outdoor unit and do not let  

Ɣ

leaves and other debris accumulate around the unit.

Leaves are a hotbed for small animals which can enter the unit. Once in the unit, such 

animals can cause malfunctions, smoke or fi

 re when making contact with electrical 

parts.

Fix the units securely

.

 

Ɣ

If the units are not mounted securely

, the units may fall or topple and injury may result.

Arrange the drain to ensure complete drainage. 

Ɣ

If proper drainage from the outdoor drain pipe does not occur during air conditioner 

operation, there could be a blockage due to dirt and debris build-up in the pipe. 

This may result in a water leakage from the indoor unit. Under these circumstances, 

stop air conditioner operation and consult your dealer for assistance. 

Safety Precautions

01_EN_3P243520-1.indd   6

2/6/2009   5:49:57 PM

English 

5

CAUTION

After prolonged use, check the unit stand and its mounts for damage. 

Ɣ

If left in a damaged condition, the unit may fall and cause injury

.

Do not allow a child to mount on the outdoor unit or avoid placing any  

Ɣ

object on it.

Falling or tumbling may result in injury

.

Do not block air inlets nor outlets. 

Ɣ

Impaired air fl

 ow may result in insuffi

 cient performance or trouble.

T

o

 avoid injury

, do not touch the air inlet or aluminium 

fi 

ns of the unit.

 

Ɣ

Do not remove the outdoor unit’

s fan guard. 

 

Ɣ

The guard protects against the unit’

s high speed fan, which may cause injury

.

Do not place objects that are susceptible to moisture directly beneath  

Ɣ

the indoor or outdoor units.

Under certain conditions, condensation on the main unit or refrigerant pipes, air fi

 lter dirt 

or drain blockage may cause dripping, resulting in fouling or failure of the object 

concerned.

Do not place water containers (fl

 ower vases, etc.) on the unit, as this 

 

Ɣ

may result in electric shocks or fi

 re.

Do not use the air conditioner for purposes other than those for which it  

Ɣ

is intended.

Do not use the air conditioner for cooling precision instruments, food, plants, animals or 

works of art as this may adversely affect the performance, quality and/or longevity of the 

object concerned.

Do not place appliances that produce naked fl

 ames in places exposed to 

 

Ɣ

the air fl

 ow from the unit as this may impair combustion of the burner.

Do not place heaters directly below the unit, as resulting heat can cause  

Ɣ

deformation.

Be sure that children, plants or animals are not exposed directly to  

Ɣ

airfl

 ow from the unit, as adverse effects may ensue. 

Do not put fl

 ammable containers, such as spray cans, within 1m from the 

 

Ɣ

blow-off mouth.

The containers may explode because the warm air output of the indoor or outdoor unit 

will affect them.

Do not install the air conditioner at any place where there is a danger of  

Ɣ

fl 

ammable gas leakage.

In the event of a gas leakage, build-up of gas near the air conditioner may result in fi

 re 

hazards.

ʊʊ

Items to be Strictly Observed

ʊʊ

01_EN_3P243520-1.indd   5

2/6/2009   5:49:56 PM

Summary of Contents for BRC1E61



















































Reviews: