21
Quick Reference of Main Menu Items
Main Menu Items
Setting and display items
Description
Reference page
Air Flow
Direction
Circulation Airflow
(Note 1, 4)
•
In case of Sprit system, maximum 4 units
(unit A, B, C, D)
•
In case of VRV, maximum 16 units (unit 0 to 15)
26
27
Individual setting list
Used to see the table for setting for maximum
4 flaps.
28
Reset All Indivi Setting
Used to clear all of the individual settings.
29
Auto swing direction is selectable from 3 patterns
to suit the layout of the room.
Standard, Right blow or Left blow
29
Quick Start
(SPLIT system only)
Used to set the room to a comfortable
temperature quickly (unless the system is not in
Dry or Fan operation).
•
The maximum quick cooling/heating operation
period is 30 minutes.
30
Ventilation
Ventilation
operation settings
for Heat Reclaim
Ventilator
Ventilation Rate
Used to set to
Low or High
.
32
Ventilation Mode
Used to set
Automatic, Energy Reclaim
Ventilation, and Bypass
.
33
Energy
Saving
Options
Energy Saving List
Enable or Disable can be set up about the
following menus.
34
Setpoint Range
The set temperature range can be restricted.
It is poss ble to restrict the temperature range
based on a model and the mode of operation.
35
Setback Condition
Determine the point when air conditioner is turned
off again from the setback control.
(recovery differential).
36
Sensing Sensor (Low)
(only if the sensing
sensor is installed)
(Note 2, 3)
When no people are detected during a
continuously fixed time, the function will
automatically change the air conditioning target
temperature
.
If people are detected, it will return to the normal
set temperature
.
37
Sensing Sensor (Stop)
(only if the sensing
sensor is installed)
(Note 2, 3)
38
Quick Reference of Main Menu
Airflow direction
range (only available
for floor standing type
indoor unit (FVQ series))
Used to set an Airflow direction for maximum
4 flaps individually.
Control Airflow and Air Diretion automatic, and
send Airflow to the room generally.
When release from the Circulation Airflow,
you can set except the Airflow
•
Air Direction to be
“
Auto
” or set the Circulation Airflow as
Enable
.
(only if the
individual airflow
function is
installed)
When no people are detected during a
continuously fixed time, the function will
automatically stop the air conditioner.
Individual setting
