14 Configuration
Installer and user reference guide
20
BK+S
Wired remote controller
4P513690-1 – 2018.03
Operation state
Status indicator behaviour
0 (Normal)
1 (Hotel setting 1)
2 (Hotel setting 2)
Error
Blinking
(no change)
(no change)
Warning
ON
ON
ON (when the backlight goes into
faint state, the status indicator
turns OFF)
Setting of status indicator intensity
ON
ON
ON
Pairing with indoor unit
Blinking
Blinking
Blinking
14.1.5
Miscellaneous settings
Group address and Airnet address (DIII)
Group address
To control the system with central control equipment, you need to
set addresses for:
▪ Groups ("Group"), and/or
▪ Units ("Group(Unit)").
The Group address and Airnet address menu has two levels. You
define groups and/or units in the first level, and set or release
addresses for those groups and/or units in the second.
Address
Description
First level
Group (Group)
A group is a group of indoor units.
When setting addresses for groups, you do NOT have to define a unit number.
Unit (Group(Unit))
A unit is an individual indoor unit.
Define the indoor unit for which you want to set an address.
