English
7
•
Operating procedure varies with heat
pump type and straight cooling type. Con-
tact your Daikin dealer to confirm your sys-
tem types.
•
To protect the unit, turn on the main power
switch 6 hours before operation.
•
If the main power supply is turned off dur-
ing operation, operation will restart auto-
matically after the power turns back on
again.
•
AUTOMATIC OPERATION can be
selected only by RSEY series or sprit sys-
tem.
•
RSX series or sprit system cooling only
type give selection of FAN or COOLING
OPERATION only.
〈〈
FOR SYSTEMS WITHOUT COOL/
HEAT CHANGEOVER REMOTE CON-
TROL SWITCH (Fig. 3)
〉〉
Press OPERATION MODE
SELECTOR button several
times and select the OPERATION
MODE of your choice as follows.
COOLING OPERATION ..................“
”
HEATING OPERATION ...................“
”
AUTOMATIC OPERATION ..............“
”
FAN OPERATION............................“
”
On AUTOMATIC OPERATION
In this operation mode, COOL/HEAT
changeover is automatically conducted at a
present indoor temperature.
Press ON/OFF button.
OPERATION lamp lights up and the system
starts OPERATION.
5. OPERATION PROCEDURE
COOLING, HEATING, AUTOMATIC
AND FAN OPERATION (Fig. 3, 4)
1
2
〈〈
FOR SYSTEMS WITH COOL/HEAT
CHANGEOVER REMOTE CONTROL
SWITCH (Fig. 4)
〉〉
Select OPERATION MODE with
the COOL/HEAT
CHANGEOVER REMOTE CONTROL
SWITCH as follows.
COOING OPERATION ....................
Refer to fig. 4-1 (
,
)
HEATING OPERATION ...................
Refer to fig. 4-2 (
,
)
FAN OPERATION ............................
Refer to fig. 4-3 (
)
Press ON/OFF button.
OPERATION lamp lights up and the system
starts OPERATION.
ADJUSTMENT
For programming TEMPERATURE and FAN
SPEED and AIR FLOW DIRECTION, follow
the procedure shown below.
Press TEMPERATURE SET-
TING button and program the
setting temperature.
Each time this button is pressed,
setting temperature rises 1°C.
Each time this button is pressed,
setting temperature lowers 1°C.
In case of automatic operation
Each time this button is pressed, set-
ting temperature shifts to “H” side.
Each time this button is pressed, set-
ting temperature shifts to “L” side.
[
°
C]
•
The setting is impossible for fan operation.
1
2
3
UP
DOWN
UP
DOWN
H
•
M
•
L
Setting
temperature
25
23
22
21
19
01_EN_3P107422-7S.fm Page 7 Tuesday, June 3, 2008 1:19 PM
