English 12
Installation
TYPE B
Position of the WLAN adapter on the wall/surface is fixed by double
face tapes. In this case screws located in accessory set are not
neccesary to fix the holder.
1. Attach two double face tapes located in accessory set to the back
side of holder as shown below.
2. Fix the WLAN holder on the wall/surface with the double face tapes.
3. Make sure that holder is fixed to the wall/surface enough to bear the
WLAN adapter.
4. Attach the WLAN adapter to the holder by sliding into it.
NOTE
Wall/surface should be clean and degreased before attaching of the
WLAN holder by double face tapes.
For more details about installation of WLAN adapter to your model
please visit http://www.onlinecontroller.daikineurope.com
Installation
Work
Double face tape
Holder