Daikin BRP069C51, Installation Manual

6 Starting up the system

Installation manual

5

BRP069C51
Wireless LAN connecting adapter
4P567679-2C – 2020.05

INFORMATION

The  exact  location  of  the  holder  depends  on  the  type  of
indoor 

unit. 

For 

more 

information, 

visit 

http://

www.onlinecontroller.daikineurope.com

.

When using screws

1

Fix the adapter holder on the wall/surface with 2 screws M3×16
(accessory).

2

Slide the adapter into the holder.

a

b

a

Screw locations

b

Adapter holder

When using double side tape

3

Attach the double-sided tape to the adapter holder.

4

With the tape, mount the holder to the surface.

5

Slide the adapter into the holder.

a

b

a

Tape

b

Adapter holder

6

Starting up the system

The  adapter  gets  its  power  from  the  indoor  unit.  For  the  adapter  to
function, make sure it is connected to the indoor unit, and the indoor
unit is powered on.

Turn  on  the  power  supply  and  check  that  the  RUN  lamp  of  the
product blinks.

7

Configuration

The customer is responsible for providing:

▪ Smartphone or tablet with minimum supported version of Android

or iOS, specified on 

http://www.onlinecontroller.daikineurope.com

▪ Internet line and communication device, such as a modem, router,

etc.

▪ Wireless LAN access point

▪ Installed free Daikin Residential Controller application.

7.1

To install the Daikin Residential
Controller application

1

Open:

▪ Google Play for appliances using Android.
▪ App Store for appliances using iOS.

2

Search for Daikin Residential Controller.

3

Follow the directions on the screen to install.

7.2

To configure the adapter

Open  the  Daikin  Residential  Controller  application  on  your
smartphone or tablet PC and follow the in-app instructions.

http://www.onlinecontroller.daikineurope.com/

8

Hand-over to the user

After  having  installed  and  configured  the  adapter,  hand  over  this
installation  manual  to  the  user  and  make  him/her  aware  of  the
following safety precautions.

DANGER

▪ Do not disassemble, modify, or repair the adapter. This

can cause fire, electric shock, or injury.

▪ Do  not  allow  the  adapter  to  get  wet  or  use  it  when

bathing  or  doing  similar  activities  with  water.  This  can
cause electric shock or fire.

▪ Do  not  use  the  adapter  near  medical  equipment,  or

persons  using  cardiac  pacemakers  or  defibrillators.
This  can  cause  life-threatening  electromagnetic
interference.

▪ Do  not  use  the  adapter  near  auto-control  equipment

such  as  automatic  doors  or  fire  alarm  equipment.  This
can  cause  accidents  due  to  erroneous  equipment
behaviour.

▪ In  case  of  abnormal  odour  or  sound,  overheating,  or

smoke  coming  out  of  the  adapter,  immediately
disconnect  the  indoor  unit  from  its  power  supply.
Otherwise,  this  can  lead  to  fire  or  malfunction.  If  this
happens, consult your dealer.

▪ In  case  you  drop  or  damage  the  adapter,  disconnect

the  indoor  unit  from  its  power  supply.  Otherwise,  this
can lead to fire or malfunction. If this happens, consult
your dealer.

NOTICE

Do  not  use  the  adapter  near  microwave  ovens.  This  can
affect wireless LAN communications.