3P225748-4G English
3
1. Operation mode selector button
• Push this button to select the operation mode of
your preference.
* Available modes vary with the indoor unit
model.
2. Fan speed control button
• Push this button to select the fan speed of your
preference.
* Available fan speeds vary with the indoor unit
model.
(For details, refer to operation manual of the
controller.)
3. Menu/OK button
• Used to enter the main menu.
• Used to enter the selected item.
4. Up button
• Used to raise the setpoint.
• The item above the current selection will be
highlighted.
(The highlighted items will be scrolled
continuously when the button is continuously
pushed.)
• Used to change the selected item.
5. Down button
• Used to lower the setpoint.
• The item below the current selection will be
highlighted.
(The highlighted items will be scrolled
continuously when the button is continuously
pushed.)
• Used to change the selected item.
Functions other than basic operation items (i.e., On/Off, Operation Mode, Fan Speed, and Setpoint) are
set from the menu screen.
NOTE
•
Do not install the remote controller in places exposed to direct sunlight, the LCD will be damaged.
•
Do not pull or twist the remote controller cord, the remote controller may be damaged.
•
Do not use objects with sharp ends to push the buttons on the remote controller, damage may result.
This remote controller is the BRC1E73 model.
Other remote controllers may vary in display.
On/Off
Mode
Fan
Speed
Cancel
2. Fan speed control button
3. Menu/OK button
8. On/Off button
10. Cancel button
9. Operation lamp
11. LCD (with backlight)
4. Up button
5. Down button
6. Right button
7. Left button
1. Operation mode
selector button
