Installation manual
BYCQ14 BYCQ140D7GFW1
Self cleaning decoration panel
4P310441-1C – 2017.05
9
(6) Push up the suction grille slowly first, and while pressing the
two knobs, finally fit the grille into the panel securely.
Panel
Knobs
(2 points)
Suction grille
Note
The suction grille can catch the fall prevention cords while the
suction grill is closed.
Check that the fall prevention cords do not protrude from the
suction grille before closing the suction grille.
Suction grille
Must not protrude
Fall prevention
cord
7-3 Hook (B)
(1)
Set the suction grille to an angle of approximately 45° and put
the hooks (in three points) onto the panel.
45°
Panel
Suction
grille
Suction grille
Panel
Suction grille
mounting angle
SUCTION GRILLE HOOKING SIDE
Display on
SUCTION GRILLE HOOKING SIDE
(2)
As shown in the illustration, hook the fall prevention cords for
the suction grille to the corner clasps (on two corners).
Change the directions of the
fall prevention cords.
Suction grille
Clasp
Fall prevention cord
Clasp
Bend the
clasp inward.
Fall prevention cord
(3) Connect the flexible hose (accessory (2)) onto the panel side.
(The flexible hose (accessory (2)) has no directionality
constraint.)
Flexible hose junction
on the panel side
Fit the claws into the
hooks (in two points)
securely.
Flexible hose
(accessory (2))
Flexible hose junction
on the panel side
Hooks
(2 points)
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
(4) Press fit the flexible hose connected in (3) into the panel.
Pay attention so that the hose will not be caught by the suction
grille closed.
Flexible
hose
To suction grille
Press fit the
flexible hose
along the shape
of the corner.
(5) Connect the opposite end of the flexible hose connected in (3)
onto the suction grille side.
*
Rotate the flexible hose joint on the suction grille side
according to the mounting direction of the suction grille as
shown in the illustration.
Flexible hose joint on
the suction grille side
Connect the
hose securely.
Flexible hose
joint on the
suction grille side
Flexible hose
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
(6) Push up the suction grille slowly first, and while pressing the
two knobs, finally fit the grille into the panel securely.
Panel
Knobs
(2 points)
Suction grille
