BYCQ14 BYCQ140D7GFW1
Installation manual
Self cleaning decoration panel
4P310441-1C – 2017.05
8
7. Attaching suction grille and
decoration corner covers
The suction grill can be rotated and attached in two directions,
either one of which is selectable.
If a number of units are installed, adjust the directions of the suction
grilles if necessary. Make directional changes as well at the request
of the customer.
7-1 Attaching suction grille
*
Select either the hook (A) or (B), and hook the claws of the
suction grille.
Note
The suction grille may be damaged if the wrong hooking side is
selected.
7-2 Hook (A)
(1)
Set the suction grille to an angle of approximately 45° and put
the hooks (in three points) onto the panel.
45°
Panel
Panel
Suction
grille
Suction
grille
SUCTION GRILLE HOOKING SIDE
Suction grille mounting angle
Display on
SUCTION GRILLE HOOKING SIDE
(2)
As shown in the illustration, hook the fall prevention cords for
the suction grille to the corner clasps (on two corners).
Change the directions of
the fall prevention cords.
Suction grille
Clasp
Fall prevention cord
Clasp
Bend the
clasp inward.
Fall prevention cord
(3) Connect the flexible hose (accessory (2)) onto the panel side.
(The flexible hose (accessory (2)) has no directionality constraint.)
Flexible hose junction
on the panel side
Flexible hose
(accessory (2))
Flexible hose junction
on the panel side
Fit the claws into the
hooks (in two points)
securely.
Hooks
(2 points)
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
(4) Press fit the flexible hose connected in (3) into the panel.
(Pay attention so that the hose will not be caught by the
suction grille closed.)
Note
Be sure not to break the flexible hose when press fitting the
flexible hose.
Flexible
hose
To suction grille
Press fit the
flexible hose
along the shape
of the corner.
(5) Connect the opposite end of the flexible hose connected in (3)
onto the suction grille side.
*
Rotate the flexible hose joint on the suction grille side
according to the mounting direction of the suction grille as
shown in the illustration.
Flexible hose joint on
the suction grille side
Flexible hose
joint on the
suction grille side
Flexible hose
Connect the
hose securely.
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
