cm-clic-cf-eng
www.clima-flex.com
23
Control/Connectivity
PCOE EXPAN-
SION MODULE
SERIAL
ADDRESS
SWITCHES IN PCOE
CHILD UNIT 1
9
CHILD UNIT 2
10
CHILD UNIT 3
11
CHILD UNIT 4
12
No other serial address will be recognized, the “expansion module
disconnected” alarm will be triggered if a wrong address is used.
EXAMPLE
:
Note: It is important that the addresses are not repeated, or the
entire instrument network on that port may collapse.
PREVIOUS REQUIREMENTS
Before proceeding, it is very important that the following
prerequisites are in place:
INSTALLATION
The equipment to be controlled must be correctly installed
according to its user’s manual. The equipment must be operating
normally and must not be in alarm condition..
CONNECTIVITY
The equipment to be controlled must be connected to your local
Internet infrastructure.
The equipment connects to a port on your local router just like any
other device and/or computer on your local area network (LAN).
Clima-Flex® logic controllers have two ports for LAN connection
(RJ45) and either port will work properly.
SETTINGS
The devices use NOIP Dynamic Domain Name Server (DDNS)
technology to be accessible from outside the local area network
(LAN).
You need to configure the DDNS service and other settings on
your LAN router.
