22
TIMER Operation
ON/OFF TIMER with an hours remaining display
(COUNT UP-DOWN ON/OFF TIMER)
• Check that the clock is correct.
If not, set the clock to the present time.
Page 11
1.
Press and hold
or
for about
5 seconds, when signal indicator (
) blinks,
release your fi nger from the button.
For ON TIMER
“
” appears on the LCD.
“ ” blinks.
For OFF TIMER
“
” appears on the LCD.
“
” blinks.
• “ ” and day of the week disappear from the LCD.
2.
Press until the time setting reaches the
point you like.
• Each pressing of the button increases or decreases the time setting by 1 hour.
• The time can be set between 1 and 12 hours.
3.
Press
or
again.
• “ ” or “
”, and setting time appear on the LCD.
• The TIMER lamp lights orange.
• To change the display mode from COUNT UP-DOWN ON/
OFF TIMER to 24 HOUR ON/OFF TIMER, repeat
STEP
1
,
and continue from
STEP
2
of “24 HOUR ON/OFF TIMER”.
Page 20,21
• Timer display mode cannot be changed while “ ” or “
”
are blinking.
Press
or
to stop the blinking.
Display
Combining display modes
• Different display modes (24 HOUR ON/OFF TIMER and COUNT UP-DOWN ON/OFF TIMER)
can be used for the ON TIMER and OFF TIMER simultaneously.
(Example)
Present time: 22:00 [unit is in operation]
OFF TIMER at 1 00 (3 hours after present time)
ON TIMER at 6 00 (8 hours after present time)
Combined
NOTE
Notes on COUNT UP-DOWN ON/OFF TIMER
• After setting, the time displayed on the LCD will automatically count down by 1 hour for every 1 hour that passes.
For example, if the OFF TIMER is set to 3 hours, the display will change as follows: 3hr
→
2hr
→
1hr
→
blank (OFF)
Switching between ON/OFF TIMER display modes (24 hour clock and hours remaining display)
• When changing timer display modes (from 24 HOUR ON/OFF TIMER to COUNT UP-DOWN ON/OFF TIMER or vice versa), the timer cancels.
The timer must be set again to activate it.
Summary of Contents for CTKM25VVMG
Page 42: ...41 MEMO...
Page 43: ...42 MEMO...
