5
|
Operation
User reference guide
38
CTXA-C(W)(B)(S) + FTXA-C(W)(B)(S)
Daikin room air conditioner
4P518786-10K – 2023.05
2
Press
to confirm the selection.
Result:
“Beep” sound is heard when the unit receives signal.
3
Check the indoor unit LED.
…lamp is blinking.
Status
Timer
Communication is OK
Operation and timer
Communication is OFF
4
Press
to exit the menu.
Result:
The display will return to the default screen.
To connect the wireless LAN to your home network
The wireless adapter can be connected to your home network using the:
▪
WPS button (Wi-Fi Protected Setup) on the router (if present),
▪
The SSID (Service Set Identifier) and the KEY (password) - located on the unit.
To connect using the WPS button
1
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display (menu ) appears.
2
Press repeatedly
or
until the WPS setting display (menu ) appears.
3
Press
to confirm the selection.
Result:
“Beep” sound is heard when the unit receives signal.
4
Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
INFORMATION
If the connection with your router is not possible, try procedure
38].
5
Press
to exit the menu.
Result:
The display will return to the default screen.
To connect using SSID and KEY number
1
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display (menu ) appears.
2
Press repeatedly
or
until the AP mode display (menu ) appears.
