5
|
Operation
User reference guide
39
CTXA-C(W)(B)(S) + FTXA-C(W)(B)(S)
Daikin room air conditioner
4P518786-10K – 2023.05
3
Press
to confirm the selection.
Result:
“Beep” sound is heard when the unit receives signal.
4
Connect your smart device to the access point in the same way as to a
standard wireless network.
5
Enter the SSID number and password located on the unit or in the accessory
set.
6
Open the Daikin Online Controller application and follow the steps on the
screen.
Result:
Wireless adapter mode will automatically change from the AP mode to
the RUN mode, the timer LED is blinking.
7
Press
to exit the menu.
Result:
The display will return to the default screen.
To reset the connection setting to the factory default
Reset the connection setting to the factory default in case you want to:
▪
switch between the WPS and the AP connection option,
▪
disconnect the Wi-Fi adapter and the communication device (e.g. router) or
smart device,
▪
repeat the setting if the connection was unsuccessful.
1
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display (menu ) appears.
2
Press repeatedly
or
until the menu appears.
3
Hold
for at least 2 seconds to confirm the selection.
Result:
“Beep” sound is heard when the unit receives signal.
Result:
The setting is reset to the factory default.
4
Press
to exit the menu.
Result:
The display will return to the default screen.
To turn off the wireless LAN connection
You can turn off the wireless connection using:
▪
the wireless adapter ON/OFF button on the unit,
▪
the user interface.
