5
|
Operation
User reference guide
23
CTXA-C(W)(B)(S) + FTXA-C(W)(B)(S)
Daikin room air conditioner
4P518786-10K – 2023.05
INFORMATION
▪
If the unit reaches the temperature setpoint in cooling or heating mode, the fan
will stop operating.
▪
When using drying operation mode, you CANNOT adjust the airflow rate setting.
5.4.1 To adjust the airflow rate
1
Press to change the airflow setting as follows:
5.5 Airflow direction
When.
Adjust the airflow direction as desired.
What.
The system directs the airflow differently, depending on the user selection
(swinging or fixed position). It does so by moving horizontal blades (flaps) or
vertical blades (louvers).
Setting
Airflow direction
Vertical automatic swing
Moves up and down.
Horizontal automatic
swing
Moves from side to side.
+
3-D airflow direction
Moves alternately up and down and from side
to side
[—]
Stays in a fixed position.
CAUTION
ALWAYS use the wireless remote control or other user interface (if applicable) to
adjust the position of the flaps and louvers. When the flaps and louvers are swinging
and you move them forcibly by hand, the mechanism will break.
The movable range of the flap varies according to the operation mode. The flap will
stop at the upper position when the airflow rate is changed to low during the up
and down swing setting.
a
b
a
Flap range in cooling or drying operation
b
Flap range in heating or fan only operation