D2CND0 D2CND0 D2TND0
D2TND0 D2TND024A4AA
Wall-mounted condensing boiler
ESIE17-09 / 2017.11
Servicing manual
13
•
Disconnect earth connection of electric supply wire (11).
•
Push DHW temperature sensor socket’s housing right
-
ward kindly by manually (12).
•
Take out the connector’s pawls from the socket’s housing
and disconnect the sensor (13).
•
Take out cable connections of fan manually (14).
•
Re-assemble in reverse order (Be careful all electrical
cables during the removal of cable group(wire harness)).
•
Power supply cable’s ends must be install to electrical
fuse directly ( it should’t be use contact socket).
Power supply cable (230 VAC) is connection to
the wire harness. Therefore, all electrical leads
connection must be taken out so that disconnect
the power supply cable.
NOTICE
4 Part replacement
(11)
(14)
(13)
(12)