background image

Instructions given here are classified into the following two categories.

   Instructions in both categories are important for safety and must be duly followed.

Caution

Warning

Failure to follow the instruction may lead to serious consequences including death or
serious injury.

Failure to follow the instruction may cause injury or material damage, which, in some
cases, leads to serious consequences.

The symbol given in the manual shows the following:

Do not attempt to do things described in the
instruction.

Be sure to provide grounding as required.

Absolutely avoid exposing the unit to water.

Be sure to follow the instruction.

Be sure to follow the instructions below

Safety Instructions

Read the manual carefully in advance for correct use

When any abnormality (such as burnt smell) is 

generated, turn the power OFF and contact the 
dealer you purchased the product from.

Continuing to operate with 
the abnormality left 
unattended may cause 
failure, electric shock or fire.

For remodelling or repair, contact the dealer 

you purchased the product from.

Failure to remodel or repair 
properly may cause water leak, 
electric shock or fire.

For transferring or reinstallation, contact the 

dealer you purchased the product from.

Failure to install properly may 
cause water leak, electric shock 
or fire.

Warning

Notes on use for users

Do not touch the inside of the controller.

Do not remove the front panel.
Touching the inside is dangerous 
and may cause failure.
For inspection and 
adjustment 
of the inside of the controller, 
contact the dealer you 
purchased the product from.

1

3P073677-12P    04.11.22    6:40  PM    ページ2

Summary of Contents for DCS601C51

















Reviews: