Do not install in a place subject to flammable
gas.
Leakage of gas resulting in
accumulation around the unit
may lead to ignition.
Do not install in a place subject
to direct sunlight.
Failure to follow the
instruction may lead to
discoloring of the LCD
that hinders proper
display.
Be sure to provide grounding.
Do not connect the grounding
wire to any gas pipe, water pipe,
lightning rod or telephone
grounding.
Inappropriate grounding may
lead to electric shock.
Do not install the controller in a place subject
to water.
Water in the device may lead
to electrical leak and failure
in the electronic components
inside.
Do not wipe the surface of the controller touch
panel with benzine, thinner or chemically-
treated dust cloth.
Failure to follow the instruction may
lead to discoloring or peeling of the
paint. Any soiling must be wiped off
with a piece of cloth soaked in a
diluted neutral
detergent and
wrung sufficiently.
Wipe again with a
dry piece of cloth.
To clean, be sure to stop operation and turn the
power OFF.
Failure to follow the
instruction may lead to
electric shock or injury.
Washing may lead to
electric shock.
Be sure to operate with the touch pen provided.
Failure to follow the
instruction may lead to
damage or failure.
Do not wash the controller
with water.
No exposure to
water allowed!
No exposure to
water allowed!
Caution
Notes on use for users
benzine
thinner
2
Before
use
3P073677-12P 04.11.22 6:40 PM ページ3
