IM
1133-C
DIII-NET COMMUNICATION GATEWAY
5
www.DaikinApplied.com
General Information
This manual contains the information you need to install the DIII-NET Communication Gateway on a MicroTech
®
III Applied
Air Handling Unit (AAH) Controller (i.e., RoofPak™ applied rooftop, Maverick™ II commercial rooftop or Self-Contained
Unit), incorporate it into the DIII-Net network, and maintain it.
Hazard Identification Messages
Recognize Safety Symbols, Words and Labels
The following symbols and labels are used throughout this manual to indicate immediate or potential hazards. It is the owner
and installer’s responsibility to read and comply with all safety information and instructions accompanying these symbols.
Failure to heed safety information increases the risk of property damage and/or product damage, serious personal injury or
death. Improper installation, operation and maintenance can void the warranty.
!
DANGER
Dangers indicate a hazardous situation which will result in death or serious injury if not
avoided.
!
WARNING
Warnings indicate potentially hazardous situations, which can result in property damage,
severe personal injury, or death if not avoided.
!
CAUTION
Cautions indicate potentially hazardous situations, which can result in personal injury or
equipment damage if not avoided.
!
WARNING
Electric shock hazard. Can cause personal injury or equipment damage.
This equipment must be properly grounded. Connections and service to the MicroTech III Air
Handling Unit Controller must be performed only by personnel knowledgeable in the operation of
the equipment being controlled.
!
CAUTION
Static sensitive components. Can cause equipment damage.
Discharge any static electrical charge by touching the bare metal inside the control panel before
performing any service work. Never unplug cables, circuit board terminal blocks, or power plugs
while power is applied to the panel.
