background image

Configurability

www.DaikinApplied.com 17 

CAT 258 • REBEL APPLIED ROOFTOP

Humidifiers

• 

Factory installed steam humidifier distribution grids 

downstream of the supply air fan

• 

Insulated and Non-insulated grids selectable to meet 

most application humidification requirements

• 

Optimized Dispersion Lengths of 15", 24", and 36" 

lengths

• 

Out of Air stream section for field mounting of steam 

generator

Figure 21: 

Rebel Applied Humidifier Section  

  

UV Lights

• 

Factory-installed ultraviolet lights are available on the 

downstream side of all cooling coils and above the unit 

drain pan.

• 

All ultraviolet lights are pre-engineered and factory 

installed for ease of use and proper placement for 

maximum effectiveness. The ultraviolet lamps irradiate 

the coil and drain pan surfaces with light in the 245 

nanometer wavelength of the light spectrum (UV-C). 

UV-C light has proven effective in killing most bacteria, 

molds, and viruses in both laboratory and practical 

application. This complete package of equipment and 

ultraviolet lights includes Intertek Services Inc. (ETL) 

safety agency certification.

Figure 22: Ultraviolet Lights    

Summary of Contents for DPSA











































Reviews: