background image

General Specification

www.DaikinApplied.com 31 

CAT 258 • REBEL APPLIED ROOFTOP

General Specification

PART 1: GENERAL

1 .01 Section Includes:

A. 

Semi-custom packaged rooftop air conditioners

1 .02 References

A. 

AFBMA 9 - Load ratings and fatigue life for ball 

bearings.

B. 

AMCA 99 - Standards handbook.

C. 

AMCA 210 - Laboratory methods of testing fans for 

rating purposes.

D. 

AMCA 300 - Test code for sound rating air moving 

devices.

E. 

AMCA 500 - Test methods for louver, dampers, and 

shutters.

F. 

AHRI Standard 340/360- Unitary large equipment

G. 

AHRI Standard 920 - DOAS

H.  AHRI Standard 1060 - Rating air-to-air heat 

exchangers for energy recovery ventilation 

equipment

I. 

ASTM B117 -  Standard practice for operating salt 

spray apparatus.

J. 

NEMA MG1 - Motors and generators.

K.  NFPA 70 - National Electrical Code.

L. 

UL 723 - Test for surface burning characteristics of 

building materials.

M. 

UL 900 - Test performance of air filter units.

N. 

UL 1995 - Standard for heating and cooling 

equipment.

O. 

UL 94 - Test for flammability of plastic materials for 

parts in devices and appliances.

P. 

IBC 2000, 2003 - International Building Code.

Q. 

NFPA 90A - Standard for the installation of air 

conditioning and ventilating systems.

R. 

NFPA 5000 - Building construction and safety code.

S.  ASHRAE 90.1 Energy Code.

T. 

ASHRAE Std. 111 - Measurement, testing, adjusting, 

and balancing of building hvac systems

1 .03 Submittals

A. 

Shop drawings: Indicate assembly, unit dimensions, 

weight loading, required clearances, construction 

details, field connection details, electrical 

characteristics and connection requirements.

B.  Product data:

1. 

Provide literature that indicates dimensions, 

weights, capacities, ratings, and electrical 

characteristics and connection requirements.

2. 

Provide data on filter media, filter performance, 

filter assembly, and filter frames.

3. 

Provide computer generated fan curves with 

specified operating point clearly plotted.

C. 

Manufacturers must clearly define any exceptions 

made to plans and specifications. Any deviations in 

layout, arrangement, or efficiency shall be submitted 

to the consulting engineer prior to bid date. 

Acceptance of deviation (s) from specifications shall 

be in the form of written approval from the consulting 

engineer.  

1 .04 Operation and Maintanence Data

A. 

Maintenance data: provide instructions for 

installation, maintenance and service

1 .05 Qualifications

A. 

Manufacturer: company specializing in 

manufacturing the products specified in this section 

with minimum five years documented experience, 

who issues complete catalog data on total product.

B. 

Certify packaged rooftop performance in accordance 

with AHRI 340/360 standards

C. 

Product energy efficiency compliant with ASHRAE 

90.1 minimum energy efficiency requirements

D. 

Startup must be done by trained personnel 

experienced with rooftop equipment.

E. 

Do not operate units for any purpose, temporary 

or permanent, until ductwork is clean, filters and 

remote controls are in place, bearings lubricated, 

and manufacturers’ installation instructions have 

been followed.

1 .06 Delivery, Storage, and Handling

A. 

Deliver, store, protect and handle products to site.

B. 

Handle carefully to avoid damage to components, 

enclosures, and finish

C. 

Store in a clean, dry place to protect from weather 

and construction traffic.

Summary of Contents for DPSA











































Reviews: