33
PIM00504
DANGER
Use an AC power supply matching this product’s power supply specifications.
Use a cable appropriate for the power supply capacity.
Connect the end of the cable by using a crimp terminal. Use a tool suited to crimp terminals.
Crimping faults may result in the cable coming loose during use, short-circuiting accidents,
and burnout due to abnormal heat generation.
Do not use anything other than the terminals provided with this product for connecting the
power supply.
Use an M4 cross-recessed pan-head screw and washer assembly, 8 mm long, for the power
supply ground terminal.
Be sure to ground ground terminals in accordance with the law in the country concerned.
Make a direct connection without going through a circuit breaker.
Do not connect the power supply cable to the input/output signal terminals or ground
terminal. This could cause an electric shock or equipment damage.
CAUTION
This product incorporates an overcurrent protection function internally, so no thermal relay
for overcurrent protection is necessary.
