Daikin EDHQ011BB6V3, Operation Manual

E(D/B)(H/L)Q011~016BB

Unit and options for air to water heat pump system

4PW67905-1A – 2013.02

Operation manual

10

Programming

Programming space heating or domestic water heating

Programming space heating or domestic water heating is carried out
as follows:

1

Press the 

<

 button.

The actual mode is blinking.

2

Use the 

pi

 and 

pj

 buttons to select the mode you want

to program (space heating 

h

 or domestic water heating 

w

)

3

Press the 

<

 button to confirm the selected mode.

The actual day is blinking.

4

Select the day you would like to consult or to program by means
of the 

pi

 and 

pj

 buttons.

The selected day is blinking.

5

Press the 

<

 button to confirm the selected day.

The first programmed action of the selected day appears.

6

Use the 

pi

 and 

pj

 buttons to consult the other

programmed actions of that day.

This is called the readout mode. Empty program actions (e.g. 3
and 4) are not displayed.

7

Press the 

<

 button for 5 seconds to enter the programming

mode.

8

Use the 

<

 button to select the action number you would like to

program or to modify.

9

Use the 

ba

 button to select:

■

For space heating:
-

x

: switch heating and the controller off.

-

9

: set the temperature by means of the 

bi

 and 

bj

 buttons.

-

a

: to select automatic temperature calculation.

■

For domestic water heating: use the 

ba

 button to enable or

disable the 

x

 action.

10

Use the 

pi

 and 

pj

 buttons to set the correct action time.

11

Repeat steps 

8

 to 

10

 to program the other actions of the

selected day.

When all actions have been programmed, make sure that the
display shows the highest action number you would like to save.

12

Press the 

<

 button for 5 seconds to store the programmed

actions.

If the 

<

 button is pressed when action number 3 is displayed,

actions 1, 2 and 3 are stored but 4 is deleted.
You automatically return to step 

6

.

By pressing the 

pr

 button several times, you return to previous

steps in this procedure and finally return to normal operation.

5 sec

5 sec

5 sec

5 sec

INFORMATION

Returning to previous steps in the programming procedure
without saving modified settings is done by pressing the

pr

 button.