1
General safety precautions
Installation and maintenance instructions
3
Daikin Altherma EHS(X/H)
Daikin Altherma integrated solar unit
008.1444099_00 – 07/2018 – EN
This manual provides all the necessary information for installation,
start-up and maintenance, as well as basic information on operation
and settings. Please see the attached documents for a detailed de-
scription of operation and control.
All heating parameters needed for smooth operation are already
factory-set. Please refer to other relevant documents for information
on setting the control.
Relevant documents
▪ Daikin Altherma EHS(X/H):
▪ Installation instructions
▪ Start-up checklist
▪ Heat pump operating manual
▪ RoCon+ HP:
▪ Installation instructions
▪ Operating instructions
▪ Outdoor unit: Installation instructions
▪ Room station EHS157034 and mixer module EHS157068: Operat-
ing instructions
▪ Other optional accessories and optional system components: As-
sociated installation and operating instructions
The guides are included in the scope of supply for the individual
devices.
1.1.2
Meaning of warnings and symbols
Warnings in this manual are classified according into their severity
and probability of occurrence.
DANGER
Indicates an immediate danger.
Disregarding this warning can lead to serious injury or
death
WARNING
Indicates a potentially dangerous situation
Disregarding this warning may result in serious physical in-
jury or death.
CAUTION
Indicates a situation which may cause possible damage
Disregarding this warning can cause damage to property
and the environment, and result in minor injuries.
This symbol identifies user tips and particularly useful in-
formation, but not warnings or hazards
Special warning signs
Some types of danger are represented by special symbols:
Electric current
Danger of explosion
Risk of burning or scalding
Risk of poisoning
Validity
Some information in this manual has limited validity. The validity is
highlighted by a symbol.
Exterior heat pump unitERGA
Heat pump indoor unitDaikin Altherma EHS(X/H)
HP convector
Comply with the stipulated tightening torque (see
chap.
)
Only applies to devices with unpressurised solar system
connection (DrainBack).
Only applies to devices with a bivalent solar system connec-
tion (Biv).
Only valid for Daikin Altherma EHS(X/H) with cooling func-
tion
Handling instructions
1
Handling instructions are shown as a list. Actions for which the
sequential order must be maintained are numbered.
è
Results of actions are identified with an arrow.
1.2
Safety instructions for installation
and operation
1.2.1
General
WARNING
Devices that have not been set up and installed correctly
can impair the function of the device and/or cause serious
or fatal injury to the user.
▪ Work on the Daikin Altherma EHS(X/H) (such as set-up,
inspection, connection and initial commissioning) must
only be carried out by persons who are authorised and
who have successfully completed
qualifying technical
or vocational training
and who have taken part in ad-
vanced training sessions recognised by the relevant au-
thorities responsible for the specific activity. These in-
clude, in particular,
certified heating engineers, quali-
fied electricians and HVAC specialists
who, because
of their
professional training
and
expert knowledge
,
have experience in the professional installation and
maintenance of heating, cooling and air conditioning
systems as well as hot water storage tanks.
▪ Switch off the external main switch before starting any
work on the Daikin Altherma EHS(X/H) and secure it
against unintentional switch-on.
▪ Do not leave any tools or other objects below the hood
of the unit after finishing installation or maintenance
work.
Avoiding danger
Daikin Altherma EHS(X/H) conforms to the state-of-the-art and
meets all recognised technical requirements. However, improper use
may result in serious physical injuries or death, as well as property
damage. To prevent such risks, only install and operate the devices:
▪ as stipulated and in perfect condition,
▪ with an awareness of safety and the hazards involved.
This assumes knowledge and use of the contents of this manual, of
the relevant accident prevention regulations as well as the recog-
nised safety-related and occupational health rules.
Before working on the hydraulic system
▪ Work on the system (such as installation, connection and initial
commissioning, for example) must only be carried out by persons
who are authorised, who have successfully completed qualifying
technical or vocational training for the respective activity and who
have taken part in advanced training sessions recognised by the
relevant responsible authority.
