Daikin EKHBH008BA, Operation Manual

Operation manual

9

EKHBH/X008BA

Indoor unit for air to water heat pump system and options

4PW54184-1

Programming quiet mode, booster heating or domestic water
heating

Programming domestic water heating, booster heater or quiet mode
is carried out as follows:

1

Press the 

<

 button.

The actual mode is blinking.

2

Use the 

pi

 and 

pj

 buttons to select the mode you want

to program (quiet mode 

s

, booster heating 

m

  or domestic

water heating 

w

).

The selected mode is blinking.

3

Press the 

<

 button to confirm the selected mode.

The first programmed action is displayed.

4

Use the 

pi

  and 

pj

  buttons to consult the programmed

actions.

This is called the readout mode. Empty program actions (e.g. 4
and 5) are not displayed.

5

Press the 

<

  button for 5 seconds to enter the programming

mode.

6

Use the 

<

 button to select the action number you would like to

program or to modify.

7

Use the 

pi

 and 

pj

 buttons to set the correct action time.

8

Use the 

ba

 button to select or deselect 

x

 as action.

9

Repeat steps 

6

 to 

8

 to program the other actions of the selected

mode.

When all actions have been programmed, make sure that the
display shows the highest action number you would like to save.

10

Press the 

<

  button for 5 seconds to store the programmed

actions.

If the 

<

  button is pressed when action number 3 is displayed,

actions 1, 2 and 3 are stored but 4 and 5 are deleted.

You automatically return to step 

4

.  By pressing the 

pr

  button

several times, you return to previous steps in this procedure and
finally return to normal operation.

Consulting programmed actions

Consulting space heating or space cooling actions

Consulting space heating or space cooling is carried out as follows.

1

Use the 

=

  button to select the operation mode (cooling or

heating) you want to consult.

2

Press the 

<

 button.

The actual mode is blinking.

3

Press the 

<

 button to confirm the selected mode.

The actual day is blinking.

4

Select the day you would like to consult by means of the 

pi

and 

pj

 buttons.

The selected day is blinking.

5

Press the 

<

 button to confirm the selected day.

The first programmed action of the selected day appears.

6

Use the 

pi

  and 

pj

  buttons to consult the other

programmed actions of that day.

This is called the readout mode. Empty program actions (e.g. 4
and 5) are not displayed.

By pressing the 

pr

 button several times, you return to previous

steps in this procedure and finally return to normal operation.

Consulting domestic water heating, booster heater or quiet
mode

Consulting domestic water heating, booster heater or quiet mode is
carried out as follows.

1

Press the 

<

 button.

The actual mode is blinking.

2

Use the 

pi

 and 

pj

 buttons to select the mode you want

to consult (quiet mode 

s

, booster heating 

m

  or domestic

water heating 

w

).

The selected mode is blinking.

3

Press the 

<

 button to confirm the selected mode.

The first programmed action is displayed.

4

Use the 

pi

  and 

pj

  buttons to consult the programmed

actions.

This is called the readout mode. Empty program actions (e.g. 4
and 5) are not displayed.

By pressing the 

pr

 button several times, you return to previous

steps in this procedure and finally return to normal operation.

Returning to previous steps in the programming procedure
without saving modified settings is done by pressing the

pr

 button.

Consulting space heating or space cooling is done in the
same way. At the start of the consulting procedure space
heating or space cooling is selected. After that, you have to
return to the start of the consulting procedure to consult
the other operation mode.

Returning to previous steps in this procedure is done by
pressing the 

pr

 button.

Returning to previous steps in this procedure is done by
pressing the 

pr

 button.