11
Start-up
Start-up
5
Start-up
5.1
Mounting
You can either fix the DHC Access Point to a wall or put it
down on a flat surface.
1. Place the DHC Access Point close to your router
and a socket.
Always keep a minimum distance of 50 cm be-
tween the DHC Access Point and your WLAN rout-
er.
2. (Optional) Fix the DHC Access Point to the wall:
a. Use a pen to mark the positions of the screw
holes
(C)
on the wall.
b. Use an appropriate drill to make the holes.
c.
Use the supplied screws and plugs to fix the DHC
Access Point.
3. Connect the DHC Access Point with the router
using the supplied network cable
(F)
.
4. Provide power supply for the accessory using the
supplied plug-in mains adapter
(G)
.
LAN
F
G
5.2
Setting up the DHC Access Point
Your Daikin Altherma unit needs to be set up before
you start setting up the DHC Access Point.
The ONECTA app is available for iOS and Android
and can be downloaded for free in the correspond-
ing app stores.
