EKRTWA
Room thermostat
4PW56102-1
Operation manual
13
Your installer can link a custom schedule to cooling and heating
mode. Refer to “Setting up of codes in the installer menu” (code
8® 01
) in the installation manual.
7
Press
=
to confirm.
8
Press
+
or
-
to adjust the
end time of this action.
Programming a day is finished
when the end time of the last
scheduled action is set to
23:59
.
You can quickly set the time to
23:59
by pressing
>
.
9
Press
=
to confirm.
10
Repeat step 6 till 9 for the next
scheduled actions of this day.
11
To program the remaining days, repeat above steps. Do
this for all days of the week.
NOTE
Once programmed you can only modify
programmed actions one by one and no additional
actions can be added.
You can clear a user-defined schedule again by
selecting it (
◊1
or
◊2
should be flashing) and then
pressing
<
during 10 seconds. “
©¬® ◊1
” or “
©¬® ◊2
”
appears on the LCD to confirm the schedule is
cleared.
1D_OM_4PW56102-1.book Page 13 Thursday, August 27, 2009 10:52 AM
