background image

5

 | 

Operation

User reference guide

32

EWAA004~008D2 + EWYA004~008D2

Packaged air-cooled water chillers

and packaged air to water heat pumps

4P688016-1 – 2022.04

3

Select 

Select

.

Delete

Rename

Select

4

Select the schedule that you currently want to use.

Possible schedules

The table contains the following information:

Schedule/Control

: This column shows you where you can consult the currently

selected schedule for the specific control. If needed, you can:

-

Select another schedule. See 

"To select which schedule you currently want to

use"

 [

4

 31].

-

Program your own schedule. See 

"5.7.3 Schedule screen: Example"

 [

4

 33].

Predefined schedules

: Number of available predefined schedules in the system

for the specific control.

 

If needed, you can program your own schedule.

Activation screen

: For most controls, a schedule is only effective if it activated in

its corresponding activation screen. This entry shows you where to activate it.

Possible actions

: Actions you can use when programming a schedule. For most

schedules, you can program up to 6 actions per day.

Schedule/Control

Description

[1.2] 

Room

 > 

Heating

schedule

Schedule for the desired room
temperature in heating mode.

Predefined schedules:

 3

Activation screen

: [1.1] 

Schedule

Possible actions

: Temperatures within range.

[1.3] 

Room

 > 

Cooling

schedule

Schedule for the desired room
temperature in cooling mode.

Predefined schedules:

 1

Activation screen

: [1.1] 

Schedule

Possible actions

: Temperatures within range.

[2.2] 

Main zone

 > 

Heating

schedule

Schedule for the desired leaving
water temperature for the
main zone in heating mode.

Predefined schedules:

 3

Activation screen

: [2.1] 

Schedule

Possible actions

:

In 

case 

of 

weather-dependent: 

Shift

temperatures within range.

Otherwise: Temperatures within range

[2.3] 

Main zone

 > 

Cooling

schedule

Schedule for the desired leaving
water temperature for the
main zone in cooling mode.

Predefined schedules:

 1

Activation screen

: [2.1] 

Schedule

Possible actions

:

In 

case 

of 

weather-dependent: 

Shift

temperatures within range.

Otherwise: Temperatures within range

Summary of Contents for EWAA008D2V3P





























































Reviews: