16
|
Unit installation
Installer and user reference guide
57
FAA71+100BUV1B
Split system air conditioner
4P654517-1 – 2021.03
3
Insert a wall cover into the wall pipe.
Ø80
a b
c
a
Wall embedded pipe (field supply)
b
Putty (field supply)
c
Wall hole cover (field supply)
4
After completing wiring, refrigerant piping and drain piping, do NOT forget to
seal the gap with putty.
16.3.3 To remove the pipe port cover
INFORMATION
To connect the piping on right-side, right-bottom, left-side or left-bottom, the pipe
port cover MUST be removed.
a
b
a
Cut off for side piping
b
Cut off for bottom piping
1
Remove the front grille (
"16.2.3 To remove the front grille"
2
Cut off the pipe port cover from inside the front grille using a coping saw.
3
Remove any burrs along the cut section using a half round needle file.
NOTICE
Do NOT use nippers to remove the pipe port cover, as this would damage the front
grille.
