background image

14

Useful Functions

Useful Functions

INTELLIGENT EYE operation is useful for energy saving

 

„

People are detected in the sensing area.

 

„

No people are detected in the sensing area.

The air conditioner is in normal operation while the 
sensor is detecting human movement.

The air conditioner will switch to energy-saving mode after 
20 minutes.

Energy saving operation

•  If no presence detected in the room for 20 minutes, the energy saving operation will start, and the INTELLIGENT EYE lamp goes off. 

 

If human movement is detected again, the INTELLIGENT EYE lamp lights up and energy saving operation terminates.

• 

This operation changes the temperature by +2°C in COOL / +2°C in DRY operation from the set temperature.  
When the room temperature exceeds 30°C, the operation changes the temperature by +1°C in COOL / +1°C in DRY operation from the 
set temperature.

•  This operation decreases the airflow rate slightly in FAN operation only.

NOTE

Note on COMFORT AIRFLOW operation

•  The airflow rate will be set to AUTO. If the up and down airflow direction is selected, COMFORT AIRFLOW operation will be cancelled.

Notes on INTELLIGENT EYE operation

• 

Application range is as follows.

90°

55°

7m

55°

Vertical angle 90°

(Side view)

Horizontal 

angle 110°

(Top view)

7m

• 

The sensor may not detect moving objects further than 7m away. (Please see the application range)

• 

Sensor detection sensitivity changes according to the indoor unit location, the speed of passers-by, temperature range, etc.

•  The sensor could also mistakenly detect pets, sunlight, fluttering curtains and light reflected off of mirrors as passers-by.
• 

NIGHT SET mode 

 Page  18

 will not switch on during use of INTELLIGENT EYE operation. 

Note on combination of COMFORT AIRFLOW operation and INTELLIGENT EYE operation

•  The airflow rate will be set to AUTO. If the up and down airflow direction is selected, COMFORT AIRFLOW operation will be cancelled.

 

Priority is given to the function of whichever button is pressed last.

COMFORT AIRFLOW /  

INTELLIGENT EYE Operation

01_EN_3P642602-1E.indd   14

25-Feb-21   11:19:16 AM

Summary of Contents for FAFC100AV1G





































Reviews: