Installation and operation manual
1
FMCQ50~125A7VEB
Air conditioning system
4PW47629-1
C
ONTENTS
Page
Before installation.............................................................................. 1
Important information regarding the refrigerant used........................ 2
Selecting installation site................................................................... 2
Preparations before installation......................................................... 3
Indoor unit installation ....................................................................... 3
Refrigerant piping work ..................................................................... 4
Drain piping work .............................................................................. 5
Electric wiring work ........................................................................... 6
Wiring example and how to set the remote controller ....................... 6
Wiring example ................................................................................. 7
Installation of the decoration panel ................................................... 7
Field setting....................................................................................... 7
Test operation.................................................................................... 9
Maintenance...................................................................................... 9
Disposal requirements .................................................................... 10
Wiring diagram ................................................................................ 11
B
EFORE
INSTALLATION
■
Leave the unit inside its packaging until you reach the
installation site. Where unpacking is unavoidable, use a sling of
soft material or protective plates together with a rope when
lifting, this to avoid damage or scratches to the unit.
■
Refer to the installation manual of the outdoor unit for items not
described in this manual.
■
Caution concerning refrigerant series R410A:
The connectable outdoor units must be designed exclusively for
R410A.
■
Do not place objects in direct proximity of the outdoor unit and
do not let leaves and other debris accumulate around the unit.
Leaves are a hotbed for small animals which can enter the unit.
Once in the unit, such animals can cause malfunctions, smoke
or fire when making contact with electrical parts.
Precautions
■
Do not install or operate the unit in rooms mentioned below.
•
Places with mineral oil, or filled with oil vapour or spray like in
kitchens. (Plastic parts may deteriorate.)
•
Where corrosive gas like sulphurous gas exists. (Copper tubing
and brazed spots may corrode.)
•
Where volatile flammable gas like thinner or gasoline is used.
•
Where machines generating electromagnetic waves exist.
(Control system may malfunction.)
•
Where the air contains high levels of salt such as air near the
ocean and where voltage fluctuates a lot (e.g. in factories). Also
in vehicles or vessels.
■
When selecting the installation site, use the supplied paper
pattern for installation.
■
Do not install accessories on the casing directly. Drilling holes in the
casing may damage electrical wires and consequently cause fire.
Accessories
Check if the following accessories are included with your unit.
Optional accessories
■
There are two types of remote controllers: wired and wireless.
Select a remote controller according to customers request and
install in an appropriate place.
Refer to catalogues and technical literature for selecting a
suitable remote controller.
■
This indoor unit requires installation of an optional decoration
panel.
FMCQ50A7VEB
FMCQ100A7VEB
FMCQ60A7VEB
FMCQ125A7VEB
FMCQ71A7VEB
Air conditioning system
Installation
and operation manual
READ THESE INSTRUCTIONS CAREFULLY BEFORE
INSTALLATION. KEEP THIS MANUAL IN A HANDY
PLACE FOR FUTURE REFERENCE.
IMPROPER INSTALLATION OR ATTACHMENT OF
EQUIPMENT OR ACCESSORIES COULD RESULT IN
ELECTRIC SHOCK, SHORT-CIRCUIT, LEAKS, FIRE OR
OTHER DAMAGE TO THE EQUIPMENT. BE SURE ONLY
TO USE ACCESSORIES MADE BY DAIKIN WHICH ARE
SPECIFICALLY DESIGNED FOR USE WITH THE
EQUIPMENT AND HAVE THEM INSTALLED BY A
PROFESSIONAL.
IF UNSURE OF INSTALLATION PROCEDURES OR USE,
ALWAYS CONTACT YOUR DAIKIN DEALER FOR
ADVICE AND INFORMATION.
1
Metal clamp
2
Drain hose
3
Washer for hanger bracket
4
Screw
5
Installation guide
6
Installation and operation manual
7
Insulation for fitting for gas pipe
8
Insulation for fitting for liquid pipe
9
Large sealing pad
10
Medium 1 sealing pad
11
Medium 2 sealing pad
12
Small sealing pad
13
Drain sealing pad
14
Paper pattern for installation (upper part of packing)
1
2
3
5
4
6
7
8
9
11
12
10
13
1x
1x
8x
4x
1x
1x
1x
1x
1x
1x
1x
1x
1x
1x
14
Summary of Contents for FMCQ50A7VEB
Page 16: ...4PW47629 1 Copyright Daikin...
