SiMX042215E
Main Functions
Part 4 Functions and Control
31
Reference
Note(s)
Note(s)
1.7 Thermostat Control
Outline
Thermostat control is based on the difference between the room thermistor temperature and the
target temperature.
Details
Thermostat OFF Condition
The temperature difference is in the zone A.
Thermostat ON Conditions
The temperature difference returns to the zone C after being in the zone A.
The operation turns on in any zones except A.
The temperature difference remains in zone B for the determined monitoring time.
(Cooling/Dry : 10 minutes)
Cooling/Dry
R4003615
Refer to Temperature Control on page 26 for details.
1.8 GOOD SLEEP OFF TIMER
Once GOOD SLEEP OFF TIMER operation starts, the target temperature will increase
gradually by 2°C in the next 2 hours to prevent excessive cooling for your pleasant sleep.
Not available in dry operation.
1.9 SMELL PROOF Operation
The smell proof operation can be activated as mentioned below:
To use SMELL PROOF operation
1. Before starting the operation, press
FAN
button to set to Auto.
2. Press
MODE
button to select the DRY or COOL operation.
3. Press
ON/OFF
button.
Air starts circulating about 1 minute after the operation is started.
However, if the POWERFUL operation is started, air starts circulating immediately.
SMELL PROOF operation can prevent some odors, but not all.
Zone B
Zone B
Zone A
Zone A
OFF
OFF
ON
Zone C
Zone C
Room thermistor temperature – target temperature
–1.5°C
Cooling : –0.5°C
Dry : –0.5°C
Cooling : –2.0°C
Dry : –2.5 ~ –2.0°C
(R24016)
Target temperature
Operation stops
at the set hour
1˚C
1 hour
1 hour
1˚C
Start
