background image

26

 

TIMER Operation

[OFF TIMER with a 24 hour clock display]

(24 HOUR ON/OFF TIMER)

 

„

To set

• 

Check that the clock is correct.

 

If not, set the clock to the present time. 

 Page  11

1. 

Press 

 .

“ 

 ” appears on the LCD.

“ 

 ” blinks.

• 

“   ” and day of the week disappear from the LCD.

2. 

Press   until the time setting reaches the 
point you like.

• 

Each pressing of either button increases or decreases the time setting by 10 minutes. 
Holding down either button changes the time setting rapidly.

3. 

Press 

 again.

• 

“ 

 ” and setting time appear on the LCD.

• 

The TIMER lamp lights orange.

Display

 

„

To cancel

 Press 

 .

• 

“ 

 ” and setting time disappear from the LCD.

• 

“   ” and day of the week appear on the LCD.

• 

The TIMER lamp goes off.

[ON/OFF TIMER combination]

 

„

To combine

• 

A sample setting for combining the 2 timers is shown below.

(Example)

Present time: 23:00 (The unit is operating)
OFF TIMER at 0:00
ON TIMER at 14:00

Combined

NOTE

NIGHT SET mode

• 

When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.5°C up in COOL, 2.0°C down in HEAT) to 
prevent excessive cooling (heating) during sleeping hours.

   

   

 

Summary of Contents for FTKM20WVMA

































































































Reviews: