manualshive.com logo in svg

Daikin FTX-N/U, Manual


Share
Download
background image

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

113

3P500432-1

2.

Items to be checked at time of delivery

Items to be checked

Check

Have you carried out field setting? (if necessary)

Are the electrical wiring box cover, air filter, suction 
grille attached?

Does the cool air discharge during the COOL 
operation and the warm air discharge during the 

HEAT operation? Does the indoor unit makes 
unpleasant sound of air discharge?

Did you explain about operations while showing the 

operation manual to your user? 

Have you explained the description of COOL, HEAT, 
DRY and AUTOMATIC (cooling/heating) given in the 

operation manual to the user?

If you set the fan speed at thermostat OFF, did you 
explain the set fan speed to the user.
Did you hand the operation manual over to the 

user?

Have you checked that there is no generation 
of abnormal noise (i.e., noise resulting from 

contamination or missing parts)?

Is the printed circuit board switch not on the 

emergency (EMG.) side?

 

The switch is factory set to the normal (NORM.) side.
If an optional accessory is in use, did you check the 

operation of the optional accessory and make field 
settings as needed?

Have you explained failure examples of  

3. CHOOSING AN INSTALLATION SITE

?

Items to be checked at time of delivery

Test items

Check

Did you explain about operations while showing 

the operation manual to the user?

Did you hand the operation manual over to the 

user?

Points for explanation about operations

The items with   WARNING and   CAUTION marks in the 
operation manual are the items pertaining to possibilities for 
bodily injury and material damage in addition to the general 
usage of the product. Accordingly, it is necessary that you 
make a full explanation about the described contents and 
also ask the users to read the operation manual.

Note to the installer

Be sure to instruct customers how to properly operate the 
unit (especially operating different functions, and adjusting 
the temperature) by having them carry out operations while 
looking at the manual.

3. CHOOSING AN INSTALLATION SITE

Hold the hangers at 4 locations to move the indoor unit 

when unpacking or after unpacked, and do not apply force 

to the piping (refrigerant and drain) and air outlet flange.

 

If the temperature and humidity in the ceiling is likely to 

exceed 86°F (30°C), RH80%, use the additional insulation 

stick to the indoor unit. 

Use the insulation such as glass wool or polyethylene that 

has thickness of 3/8 inch (10mm) or more. However, keep 

the insulated outside dimension smaller than the ceiling 

opening so that the unit may go through the opening at 

installation.

(1) Select the installation location that meets the following 

conditions and get approval of the user. 

•

Where the cool and warm air spreads evenly in the room.

•

Where there are no obstacles in the air passage.

•

Where drainage can be ensured.

•

Where the ceiling’s lower surface is not remarkably inclined.

•

Where there is sufficient strength to withstand the mass
of the indoor unit. (If the strength is insufficient, the

indoor unit may vibrate and get in contact with the ceiling 
and generate unpleasant chattering noise.)

•

Where a space sufficient for installation and service can

be ensured. 

(Refer to Fig. 1 and Fig. 2)

•

Where the piping length between the indoor and the 
outdoor units is ensured within the allowable length. 
(Refer to the installation manual attached to the outdoor unit.)

•

Where there is no risk of flammable gas leak.

[ Installation Space Requirements ]

Maintenance 
space for 
drain pan

Maintenance 

space for 

electrical 

components

Secure the maintenance 

space for the drain pan and 

electrical components.

17-11/16 (450) or more

Fig. 1 

unit: inch (mm)

Floor

Ceiling

100 (2500)  or more

H2 or more*

13/16  (20) or more

H1=9-5/8  (245)*

Fig. 2 

unit: inch (mm)

•

* Dimension H1 indicates the product height.

•

* Secure a downward slope of at least 1/100 specified in

7. DRAIN PIPING WORK

 and determine dimension H2.

4

01_EN_3P500432-1.indd   4

10/24/2017   18:32:30

Summary of Contents for FTX-N/U





































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for FTX-N/U

Gardena 7000 Operator'S Manual preview
7000
Brand: Gardena Pages: 13
WarmFlow A Series User Instructions preview
A Series
Brand: WarmFlow Pages: 89
Fenix GRT Series Instructions For Installation And Use Manual preview
GRT Series
Brand: Fenix Pages: 8
Panasonic CS-E12NKUAW Information preview
CS-E12NKUAW
Brand: Panasonic Pages: 2
Panasonic CS-E12NKUAW Quick Manual preview
CS-E12NKUAW
Brand: Panasonic Pages: 2
Ebsray V Series Installation, Operation & Maintenance Instructions Manual preview
V Series
Brand: Ebsray Pages: 12
VARISCO V Series Instructions For The Installation, Use And Maintenance preview
V Series
Brand: VARISCO Pages: 16
EBARA GS Series Operating Instructions, Installation & Maintenance Manual preview
GS Series
Brand: EBARA Pages: 22
VARISCO GS Series Operating And Maintenance Manual preview
GS Series
Brand: VARISCO Pages: 72
Toyostove Laser 72 Type E User Manual preview
Laser 72 Type E
Brand: Toyostove Pages: 31
UNIPRODO UNI_SAUNA_B4.5KW User Manual preview
UNI_SAUNA_B4.5KW
Brand: UNIPRODO Pages: 17
Mueller 8824390 Installation And Operation Manual preview
8824390
Brand: Mueller Pages: 46
Graco HYDRA-SPRAY President A Series Instructions-Parts List Manual preview
HYDRA-SPRAY President A Series
Brand: Graco Pages: 20
IMO OptiLine LPE4 Original Operating Manual preview
OptiLine LPE4
Brand: IMO Pages: 24
Modine Manufacturing 215BTC260 Installation And Service Manual preview
215BTC260
Brand: Modine Manufacturing Pages: 32
Claudgen RAC15HL ScreenZone Installation And Operating Manual preview
RAC15HL ScreenZone
Brand: Claudgen Pages: 20
DROPSA 3106000 User And Maintenance Manual preview
3106000
Brand: DROPSA Pages: 9
Agilent Technologies TriScroll 620 Series Installation And Operation Manual preview
TriScroll 620 Series
Brand: Agilent Technologies Pages: 26

Brands by name

Popular brands

Load more brands