25
TIMER Operation
TIMER Operation
ON/OFF TIMER Operation
Timer functions are useful for automatically switching the air conditioner on or off
at night or in the morning. You can also use the ON TIMER and OFF TIMER
together.
[ON TIMER with a 24 hour clock display]
(24 HOUR ON/OFF TIMER)
To set
•
Check that the clock is correct.
If not, set the clock to the present time.
Page 11
1.
Press
.
“
” appears on the LCD.
“
” blinks.
•
“ ” and day of the week disappear from the LCD.
2.
Press until the time setting reaches the
point you like.
•
Each pressing of either button increases or decreases the time setting by 10 minutes.
Holding down either button changes the setting rapidly.
3.
Press
again.
•
“ ” and setting time appear on the LCD.
•
The TIMER lamp lights orange.
Display
To cancel
Press
.
•
“ ” and setting time disappear from the LCD.
•
“ ” and day of the week appear on the LCD.
•
The TIMER lamp goes off.
NOTE
Note on TIMER operation
•
When TIMER is set, the present time is not displayed.
In the following cases, set the timer again.
•
After the circuit breaker has turned off.
•
After a power failure.
•
After replacing the batteries in the remote controller.
01_EN_3P651499-7C.indd 25
17-Oct-22 4:55:40 PM
