Daikin FTXR28EV1B, Installation Manual

■

English

6

6.

How to replace the drain plug and drain hose.

• Replacing onto the left side

1) Remove the insulation fixing screws on the right to 

remove the drain hose. 

2) Reattach the insulation fixing screw on the right as it 

was.

*(Forgetting to attach this may cause water 

leakages.) 

3) Remove the drain plug on the left side and attach it 

to the right side. 

4) Insert the drain hose and tighten with included 

 indoor unit fixing screw.

7.

How to set the different addresses.

• When 2 indoor units are installed in one room, the 

2 wireless remote controllers can be set for different 
addresses. 
1) Remove the front grille. (3 screws)
2) Cut the address jumper “JA”. (See Fig. 1)

3) Remove the remote controller lid and cut the 

address jumper “J4”. (See Fig. 2) 

Attachment on the right side (factory default)

Drain hose

Attachment on the left side

* The drain hose is on the back of the unit.

Front side of unit

Drain hose

Drain hose attachment position

Right side

Left side

Indoor unit 
fixing screw

F

Insulation 
fixing screw

How to set drain plug.

No gap.

Do not apply lubricating oil (refrigerant 
oil) when inserting.
Application of causes deterioration and 
drain leakage of the plug.

Insert a hexagon wrench (4mm).

F

Electric parts box cover

Cut JA.

Fig. 1

J4

Fig. 2

Cut section

01_EN_3P177302-1.fm  Page 6  Tuesday, May 30, 2006  9:36 AM