8
Preparation before Operation
■
To set the clock
1. Press “CLOCK button”.
“
” is displayed.
“
” and “
” blink.
2. Press “SELECT button” to set
the current day of the week.
3. Press “CLOCK button”.
“
” blinks.
4. Press “SELECT button” to set
the clock to the present time.
Holding down “
” or “
” button
rapidly increases or decreases the time
display.
5. Press “CLOCK button”.
Point the remote controller at the indoor
unit when pushing the buttons.
“ ” blinks.
NOTE
• If the indoor unit’s internal clock is not set to the correct time, ON/OFF TIMER and
WEEKLY TIMER will not operate punctually.
1, 3, 5
2, 4
01_EN_3P266961-1.fm Page 8 Tuesday, June 8, 2010 2:36 PM
