19
OPERATING INSTRUCTION
1.1 MODE Button
•
Press the
MODE
button to select the type of operating mode.
•
For cooling only unit, the available modes are:
COOL ( ), DRY ( )
and
FAN ( )
.
•
For heat pump unit, the available modes are:
AUTO ( ), COOL ( ), DRY ( ), FAN ( )
and
HEAT ( )
.
1.2 TURBO
Fan Speed
Press the TURBO key once to activate Turbo fan speed. Turbo symbol will be shown. To disable
Turbo fan speed and back to previous fan speed, press the Turbo key once again. If user presses the
FAN button or turn off the unit, the turbo speed will be disabled. This speed is only valid during COOL
mode for selected models.
1.3 Automatic air swing
•
Press the
SWING
button to activate the automatic air swing function.
•
To distribute the air to a specific direction, press the
SWING
button and wait until the louver move
to the desired direction and press the button once again.
1.4 “ ”
or
“ ”
Set Temperature Button
Press the temperature button and set the temperature of your choice by pressing “ ” or “ ” button
once, temperature changes by 1°C or 1°F. The default temperature setting range is from 16°C to 30°C
(60°F to 86°F). When the Option 20 - 30°C is set, the temperature range limit is set to 20°C to 30°C
(68°F to 86°F). Pressing both keys simultaneously will toggle the temperature setting between °C
and °F. No temperature setting is allowed during FAN mode (No set temp display). There is no room
temperature display.
1.5 FAN
Speed Function
Fan speed can be changed via pressing the FAN key:
Low > Med > High > Auto >
*FAN speed is not available in DRY mode.
1.6 ON/OFF
Button
Please allow 10 seconds for initialization during manual power on.
Starting Operation:
–
Press the ON/OFF button, the LCD will show full display and the unit is turned on.
Stopping Operation:
–
Press the ON/OFF button, the unit is turn off.
1.7 Power up Settings
The unit will start up with main board’s last state setting during power up. If last state information is not
available, the unit will use the default settings. The default settings are as below:
Unit:
Off
Mode:
Cool
Fan Speed:
High
Swing:
Off
Turbo:
Disable
1.8 Key Lock
These key lock function inhibits any setting change. Press and hold both TURBO and SWING keys for 5
seconds will activate/deactivate the key lock function; “KEYLOCK” will be shown/disappear on Display
panel. Upon all the keys are locked, only ON/OFF, TURBO and SWING (to unlock) can be pressed.
1-IMOM-FS-FVFC-RZFC-DAIKIN-EN.indd 23
1-IMOM-FS-FVFC-RZFC-DAIKIN-EN.indd 23
5/14/2020 5:54:00 PM
5/14/2020 5:54:00 PM
Summary of Contents for FVFC71AV16
