9
■
Turn the breaker on
• After the power is turned on, the flap of the indoor unit opens and closes once to set the
reference position.
NOTE
■
Tips for saving energy
• Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
• A clogged air filter causes inefficient operation and wastes energy.
Clean it once every 2 weeks.
■
Please note
• The air conditioner always consumes a small amount of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker off.
• Use the air conditioner in the following conditions.
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
Recommended temperature setting
For cooling:26-28°C
For heating:20-24°C
Mode
Operating conditions
If operation is continued out of this range
COOL
Outdoor temperature:
〈
3MXS
〉
–5-46°C
〈
RMXS
〉
–5-46°C
〈
4MXS
〉
–10-46°C
〈
RXS
〉
10-46°C
Indoor temperature: 18-32°C
Indoor humidity: 80% max.
• A safety device may work to stop the operation.
(In multi system, it may work to stop the operation of
the outdoor unit only.)
• Condensation may occur on the indoor unit and drip.
HEAT
Outdoor temperature:
〈
3/4MXS
〉
–15-24°C
〈
RMXS
〉
–15-24°C
〈
RXS
〉
–15-24°C
Indoor temperature: 10-30°C
• A safety device may work to stop the operation.
DRY
Outdoor temperature:
〈
3MXS
〉
–5-46°C
〈
RMXS
〉
–5-46°C
〈
4MXS
〉
–10-46°C
〈
RXS
〉
10-46°C
Indoor temperature: 18-32°C
Indoor humidity: 80% max.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
01_EN_3P278434-4C.fm Page 9 Thursday, August 18, 2016 11:22 AM