17
TIMER Operation
Timer functions are useful for automatically switching the air conditioner on or off
at night or in the morning. You can also use OFF TIMER and ON TIMER in
combination.
To use OFF TIMER operation
Check that the clock is correct.
•
If not, set the clock to the present time.
Page 9
Press
1.
.
” is displayed.
” blinks.
“
“
“
•
” and day of the week disappear from the LCD.
Press
2.
until the time setting reaches the
point you like.
Each pressing of either button increases or decreases the time setting by 10 minutes.
•
Holding down either button changes the setting rapidly.
Press
3.
again.
“
•
” and setting time are displayed on the LCD.
The TIMER lamp lights yellow.
•
Control panel
To cancel OFF TIMER operation
Press
.
“
•
” and setting time disappear from the LCD.
“
•
” and day of the week are displayed on the LCD.
The TIMER lamp goes off.
•
NOTE
Notes on TIMER operation
When TIMER is set, the present time is not displayed.
•
Once you set ON/OFF TIMER, the time setting is kept in the memory. (The memory is canceled when remote controller batteries are replaced.)
•
When using the ON/OFF TIMER to start/stop operation, the actual operation start/stop time may differ from the time set.
•
(Maximum of about 10 minutes)
NIGHT SET MODE
When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.5°C up in COOL, 2.0°C down in HEAT) to
•
prevent excessive cooling (heating) for your pleasant sleep.
01_EN_3P278434-5C.indd 17
01_EN_3P278434-5C.indd 17
8/18/2016 1:21:16 PM
8/18/2016 1:21:16 PM
