27
Filters
Open the front panel.
1.
Page 26
Remove the air
fi
lter.
2.
Press the claws on the right and left of the air
fi
lter down slightly, then pull upward.
•
Take off the titanium apatite photocatalytic
3.
air-purifying
fi
lter.
Hold the tabs of the frame, and remove the claws in 4 places.
•
Clean or replace each
fi
lter.
4.
See
fi
gure.
Set the air
fi
lter and titanium apatite photocatalytic air-purifying
5.
fi
lter as they were and close the front panel.
Operation without air
fi
lters may result in troubles as dust will accumulate inside the indoor unit.
•
Insert the 2 tabs on the lower side of air
fi
lter into the body.
•
Then, insert the 2 tabs on the upper side into the body.
•
Insert the tab on the right side into the body.
•
Close the panel slowly.
•
Slide the 2 stoppers on the left and right sides
•
outward until they click.
Air filter
Titanium apatite
photocatalytic
air-purifying filter
CAUTION
Do not touch the aluminum
fi
ns by bare hand at the time of dismounting or mounting the
fi
lter.
•
01_EN_3P278434-2A.indd 27
01_EN_3P278434-2A.indd 27
7/22/2011 3:31:23 PM
7/22/2011 3:31:23 PM
