FWF
Fan coil units
4PW64524-1 – 09.2010
Installation manual
23
4 Install the fan coil unit
4.7.2 Connect the drain piping to the unit
1
Push the drain hose (delivered with the unit) as far as possible over the drain socket as
illustrated in the figure below.
Fig. 4.19: Connecting the drain hose
2
Tighten the metal clamp until the screw head is less than 4 mm from the metal clamp part
as illustrated in the figure below.
Fig. 4.20: Wrap sealing pad
Perform the drain piping work
b
a
a
Drain socket (fixed to the unit)
b
Drain hose (delivered with the unit)
a
e
b
c
d
≤
4 mm
c
d
b
A
A'
A-A'
a
a
Drain socket (fixed to the unit)
b
Drain hose (delivered with the unit)
c
Metal clamp (delivered with the unit)
d
Large sealing pad (delivered with the unit)
e
Drain piping (field supply)
Summary of Contents for FWF02B7TV1B
Page 39: ...NOTES...
