Daikin FXDQ-SPV1, Engineering Data

FXDQ-SPV1 EDTFVN391825

27

3P347455-11H

2

2-3 Optional parts

   (b) Places in which corrosive gas can be generated, such 

         as sulfur dioxide.

         The copper pipes or welded parts can be corroded 

         and lead to refrigerant leakage.

   (c) Places near any machine which generates 

         electromagnetic wave.

         Electromagnetic wave can have influence on the 

         control system, so the air conditioner cannot work 

         properly.

   (d) Places in which any combustible gas is leaked out, any 

         carbon fiber or combustible powder floats, or volatile 

         combustible gas such as gasoline or thinner is stored.

         In case that the air conditioner is used in such places, 

         fire can occur.

· 

Please never touch any fin of the heat exchanger.

   Improper touching can cause damages.

· 

Please pay special attention to the transport of the product.

   PP packing straps are used for some products. Please 

   never lift and pull the PP packing straps to transport. 

   It is dangerous.

· 

For the sake of safety, please discard the packing materials.

   Packing materials such as nails and timbers can lead to 

   stabbings or other harms. 

   Please tear off and discard the plastic bags, so as to 

   prevent children from playing with plastic bags and leading 

   to suffocation.

· 

Please do not switch off the power supply when the 

   operation is just stopped.

   Please wait for at least 5 minutes before switching off the 

   power supply.

   Otherwise water leakage and other problems can occur.

· 

Depending on different setting environment, electromagnetic 

   interference can occur for different products.

   In this case, keep proper distance from the product.

Please follow the State standards to carry out the 

installation work.

2. BEFORE INSTALLATION

Before the installation work is completed, please 

never discard any accessory which may be required 

during installation. Never discard!

1. Determine the route for moving in the air conditioner 

    in advance.

2. Before moving the air conditioner to the place of 

    installation, never unpack it. In cases that the air 

    conditioner has to be unpacked, soft ropes shall be 

    used when hoisted up or a protection plate shall be 

    placed in the point of the hoisting cable, so as to 

    prevent the air conditioner from damage or scratching.

When moving the air conditioner whether when it is 

being unpacked or after it is unpacked, please hold 

the hoisting bracket base. Never apply force on the 

refrigerant pipe, water drainage pipe or plastic parts.

Before installing the air conditioner, please confirm 

whether the refrigerant used is R410A refrigerant.

For the installation of the outdoor unit, please make 

references to the installation manual for the outdoor unit.

2-1 Notes

· 

Please tell the correct operating methods of the various 

   functions as well as the temperature adjustment 

   methods of the air conditioner to the user, and ask the 

   user to read the operation manual and carry out 

   operations at the same time.

· 

The air conditioner is not suitable to be installed in 

   places in which high content of salt is contained in the air, 

   such as coast; and is not suitable in places in which the 

   fluctuation of voltage is high, such as factory.

   The air conditioner is also not suitable to be used in 

   vehicles or ships.

2-2 Accessories

Please check whether the following articles are supplied 

with the air conditioner.

Name

Metal clip (1)

Water drainage 

hose (2)

Insulation piece 

for connector

Seal

Quantity

1 piece

1 piece

1 piece each

1 piece each

Shape

For liquid pipe (3)

Large (5)

For air pipe (4)

Middle (6)

Name

Bolt for flange 

connection (7)

Washer for hoisting

bracket base (8)

Banding tie

Quantity

1 set

8 pieces

1 set

Shape

Large (9)

8 pieces

16 pieces

Small (10)

4 pieces

Name

Quantity

Shape

Washer positioning

 plate (11)

Seal (12)

4 pieces

2 pieces

(Other)
•  Operation manual
•  Installation manual
•  Conforming certificate 

   of product

· 

The indoor unit needs one remote control for operations 

   as listed in the following table.

Remote control

Applicable model

Wired R/C

Wireless 

R/C

H/P

C/O

BRC1C62 (3 ranges)

FXDQ 

～ 

SPV1

a. Key points to be inspected after completion of 

    installation.

During installation work and during inspection after 

completion of installation, pay special attention to 

the following points.

Items of Inspection

Are the indoor unit and outdoor 

unit installed firmly?
Has air leakage inspection been 

carried out?

Is the heat insulation good? 

(Refrigerant pipe, water 

drainage pipe and air pipe)
Is water smoothly drained off?
Is the power voltage consistent 

with the one specified on the 

nameplate of the machine?
Is the connection of the cable 

and the pipe correct?
Is the air conditioner safely 

grounded?
Are cables with the specified 

specifications used?
Are the suction inlet and air 

blow outlet of the indoor unit 

and the outdoor unit blocked by 

anything?
Have the length of the refrigerant 

pipe and the filled amount of 

refrigerant been recorded?

Results possibly occurring 

in case of any error

Inspected 

and signature

At the same time, please make references to Section 

“SAFETY PRECAUTIONS”.

The air conditioner falls off, 

vibrates and sends out noise.
There is no sufficient cool air 

or hot air.

Condensate drips off.

Water leaks out.

The machine cannot work 

normally or parts are burnt off.
The machine cannot work 

normally or parts are burnt off.
Once there is electricity 

leakage, it is very dangerous.
The machine cannot work 

normally or parts are burnt off.

There is no sufficient cool air 

or hot air.

The amount of the refrigerant 

of the air conditioning system 

is unknown.

BRC1E62 (3 ranges)
BRC4C65 (3 ranges)
BRC4C66 (3 ranges)