18
|
Electrical installation
Installer and user reference guide
67
FXSA15~140A2VEB
VRV system air conditioner
4P599622-1 – 2020.05
18 Electrical installation
In this chapter
18.1 About connecting the electrical wiring
Typical workflow
Connecting the electrical wiring typically consists of the following stages:
1
Making sure the power supply system complies with the electrical
specifications of the units.
2
Connecting the electrical wiring to the outdoor unit.
3
Connecting the electrical wiring to the indoor unit.
4
Connecting the main power supply.
18.1.1 Precautions when connecting the electrical wiring
DANGER: RISK OF ELECTROCUTION
INFORMATION
Also read the precautions and requirements in the "General safety precautions"
chapter.
INFORMATION
"18.1.3 Specifications of standard wiring components"
69].
WARNING
▪
All wiring MUST be performed by an authorised electrician and MUST comply
with the applicable legislation.
▪
Make electrical connections to the fixed wiring.
▪
All components procured on-site and all electrical construction MUST comply
with the applicable legislation.