5
|
Operation
Installer and user reference guide
26
BK+S
Madoka wired remote controller
4P596268-1A – 2022.02
IF
THEN
The centralised controller or schedule
imposes a setpoint that exceeds the
r3°C/–3°C setpoint range.
The imposed setpoint becomes the new
upper/lower limit of the +3°C/–3°C
range, and the whole range shifts in
relation to this new limit.
Example:
the reference setpoint is set
to 25°C, yielding the following setpoint
range:
28°C
+3°C
-3°C
25°C
22°C
If the centralised controller or schedule
changes the setpoint to 21°C, which is
below the range, then "21°C" becomes
the new lower limit, and the range
shifts in relation to this new limit.
28°C
+3°C
-3°C
25°C
22°C
27°C
+3°C
-3°C
24°C
21°C
21°C
5.3.2 To set the setpoint
Prerequisite:
The active operation mode is either 'Cooling', 'Heating', or 'Auto'.
1
In the home screen, use and to adjust the setpoint.
Result:
The indoor unit changes its temperature setpoint.
5.4 Date and time
Set the date and time for the indoor units connected to the controller.
5.4.1 About date and time
Depending on daylight saving time settings, the date and time menu has the
following daylight saving time indicators:
Summary of Contents for Madoka BRC1H82K
Page 1: ...Installer and user reference guide Madoka wired remote controller BRC1H82W BRC1H82K BRC1H82S ...
Page 134: ......
Page 135: ......
