u
ser
I
nTerfaCe
www.DaikinApplied.com 17
OM 1077-1 • MAVERICK I
u
ser
I
nTerfaCe
Keypad
The keypad consists of Up, Down, Left, Right arrow keys, and
an Enter key. The Right and Left keys allow the user to select
among the different groups of menus. The Up and Down keys
allow the user to scroll vertically through sub-menus within
the menu group. Up and Down keys also allow the input of
certain parameters, such as set points and time delays. Before
changing any parameter please see the appropriate sections
and have a full understanding of what you are changing.
Adjustment are possible only when a blinking cursor is over
or next to the parameter to be adjusted. The blinking cursor is
available for adjustable parameters after the user presses the
Enter key (center key) while the value in question is shown on
the display. Once the adjustment is made, the user must press
the Enter key again for the change to take effect. During the
adjustment, either left or right keys work as “escape” so the
parameter reverts back to its original value and the cursor is no
longer visible.
Figure 8: Keypad and Display
Down
Right
Left
Up
Enter
Display
