21
Changing the setting
Advanced Settings
Function
1
2
3
4
Streamer output
settings
(Normal/Low)
Setting at time of
purchase: Normal
If the hissing sound generated
by Streamer discharge or the
smell of ozone bothers you,
set it to Low.
• It is recommended that the
Streamer output be set to
Normal as deodorising capacity
is reduced when set to Low
Can be performed either during
operation or while operation is
stopped.
Press
for about 5 seconds
and when a short beep sounds,
press
while continuing to
hold down
.
Release both
and
when a short beep sounds.
ANTI-POLLEN MODE lamp will light up after
blinking.
Blinking Lit up
According to the current setting, the FAN lamp
will turn from blinking to lit up.
Normal
Low
Press
to change the setting
*
Each press cycles between Normal and Low.
Normal
Low
Streamer operation condition
FAN/MODE setting
Streamer output setting
Normal
Low
FAN
Turbo
ON
Standard
ON-OFF*
Quiet, Low
ON-OFF*
OFF
MODE
AUTO FAN,
ANTI-POLLEN,
CIRCULATOR
ON-OFF*
ECONO
ON-OFF*
OFF
*
The Streamer operation status ON-OFF means that
the Streamer turns ON and OFF automatically
depending on the degree of air impurity and FAN
setting.
About the Streamer lamp
When the setting condition of Streamer is
ON–OFF or ON, it is always lit up. (However, it
is unlit during Monitoring mode).
It is unlit when the setting condition of Streamer
is OFF.
Press
A short beep sounds with the
ANTI-POLLEN MODE lamp
blinking while the FAN lamp
blinks according to the new
setting.
Blinking
Normal
Low
While the lamp is blinking,
unplug the power supply plug,
wait at least 5 seconds, and
then insert the power supply
plug again.
Setting is now complete.
Power supply plug
Power
socket
• If this procedure is not
performed, the unit will not
return to the regular operation
mode.
• Settings are remembered even
if the unit is unplugged.
