12
English
Operation
Operation
WARNING
•
Do not turn off the unit by removing the power supply plug during operation.
(Fire due to overheating or electric shock may result)
•
Do not operate with the carbon filter unit, dust collection filter and other components removed. (Deep ultraviolet leakage may harm your eyes and skin)
Using Air purifying Operation (turning operation ON/OFF)
Purifies the air in the room.
Press
.
• Press again to turn OFF.
Attention
Do not move the unit, or attach or remove components to/from the unit while it is in operation. Breakage or malfunction may result.
AUTO UV
UV rays are emitted automatically.
•
When the operation is turned ON, the dust collection filter inside the unit is exposed to UV rays (approx. 60 minutes).
If you continue the operation, the UV emission (approx. 60 minutes) will be repeated approx. every 180 minutes after the end of the UV emission.
• UV ON/OFF lamp (blue) lights up when UV rays are emitted.
Hand-operated UV
UV rays are emitted manually.
Press
.
•
UV rays are emitted (for about 60 minutes).
•
UV ON/OFF lamp (blue) lights up during emission of UV rays.
•
If
is pressed during the emission of UV rays, the emission of UV rays stops and the UV ON/OFF lamp is turned off.
The UV emission is repeated (approx. 60 minutes) every 180 minutes (approx.) after the UV emission is stopped.
(Return to AUTO UV.)
•
UV emission cannot be performed while the operation is stopped.
Note
•
Depending on the usage time, the length of time UV rays are emitted during each emission can be extended up to 180 minutes.
• When the indoor temperature is high, UV emission is stopped even though the UV ON/OFF lamp remains lit to protect the UV unit.
•
At the time of purchase, the unit is set to “AUTO FAN MODE”.
•
When the power supply plug is removed or the unit is turned OFF, it will operate with the settings last used the next time it is turned ON.
•
Operation settings cannot be changed for about 2 seconds immediately after the power supply plug is inserted.
Changing the Airflow Rate
Select the desired FAN setting.
Press
.
• Each press cycles between the FAN lamps (green) or
the MODE lamps (green).
: Quiet
: Low
: Standard
: Turbo
* The size of the symbols
varies in accordance with the
FAN setting.
(Quiet)
(Low)
(Standard)
(Turbo)
FAN
MODE
(WAVE)
(ECONO)
(AUTO FAN)
About FAN setting
Quiet
A gentle breeze is emitted.
Recommended for use during sleep hours. As the deodorizing capacity is reduced, it is recommended that the
FAN setting be set to “Standard” or above if odor needs to be quickly eliminated from a room.
Turbo
The ambient air is quickly purified using a large airflow rate.
Recommended for use while you are cleaning up a room.
01_EN_3P671617-2A.indd 12
2021/11/22 16:27:35
Summary of Contents for MCB50YSAU
Page 2: ...1...
Page 27: ...26 English...
