background image

4

English

Read First

 

 

WARNING  

Observe in order to prevent fire, electric shock or severe injury.

 

„

Do not use in the following places

• 

Places where oil or flammable gases are used or may leak. 

(Fire or smoke may result from 

ignition or suction toward the unit, or injury may result from degradation or cracking of plastic)

• Places where there are corrosive gases or metal dust particles. 

(Fire or smoke may result 

from ignition or suction toward the unit)

• 

Places where temperature and humidity levels are high or water may splash, such 

as a bathroom. 

(Fire or an electric shock may result from electrical leakage)

• Places accessible to small children. 

(An electric shock or injury may result)

 

 

DANGER

• 

Any abnormalities in the operation of the air purifier, such as smoke or fire, could 

result in severe injury or death. Turn off the power and contact the place of purchase 

immediately.

• 

If equipment utilizing a burner is used in the same room as the air purifier, there is 

the danger of oxygen deficiency which could lead to an asphyxiation hazard 

resulting in serious injury or death. Be sure to ventilate the room sufficiently to 

avoid this hazard.

• 

Safely dispose of the packing materials. Packing materials, such as nails and other 

metal or wooden parts, may cause cuts or other injuries.

• 

Tear apart and throw away plastic packaging bags so that children will not play with 

them. Children playing with plastic bags face the danger of death by suffocation.

 

 

WARNING  

Observe in order to prevent fire, electric shock or severe injury.

 

„

During use

• Do not use chlorinated or acidic detergents. 

(Injury may result from degradation or cracking of 

plastic, or harm may be caused to health from the production of toxic gases)

• 

Keep burning cigarettes or incense sticks away from the unit. 

 

(Fire or smoke may result from ignition or suction toward the unit)

• 

Do not attempt to disassemble, reassemble or repair the unit yourself. 

 

(Fire, an electric shock or injury may result) 

• 

Do not insert fingers, sticks, or any other item, into the air inlets or air outlet. 

 

(An electric shock, injury or damage may result)

• Do not pour water onto the air outlet or the unit. 

(Fire or an electric shock may result)

• 

Do not use flammable substances (hair spray, insecticide, etc.) near the unit.

• Do not wipe the unit with paint thinner or other chemicals. 

(An electric shock, fire or cracking 

may result)

 

„

Immediately turn off and unplug the unit if there are any signs of abnormality and 

malfunction

Examples of abnormality and malfunction

• 

The unit does not operate even if the switch is turned on.

• Electrical cord is damaged.

• There are abnormal sounds or vibrations during operation.

• 

The casing of the unit has become deformed or is abnormally hot.

• 

There is a burnt smell. (Malfunction, an electric shock, smoke, fire, etc., may result if the 

abnormality is not addressed and the unit continues to be used)

Contact the place of purchase.

01_EN_3P671617-2A.indd   4

2021/11/22   16:27:32

Summary of Contents for MCB50YSAU





























Reviews: