background image

5

Read First

About the deep ultraviolet (UVC) LED

This product is equipped with a deep ultraviolet (UVC) LED for sterilization. 
Do not operate in the following conditions.

 

„

Do not operate with the carbon filter unit, dust 

collection filter and other components removed.

 

„

Do not operate if the unit is damaged. 

(Harm to eyes and skin due to the escape of deep ultraviolet 

may result)

Symptoms may appear even after a very short time, especially 
for people who are photosensitive. 
In case you feel unwell, please consult with a medical 
professional.

 

„

Do not touch the UV unit.

(Malfunction may result)

 

„

Do not look inside 

the unit while it is 

operating.

UV unit

 

 

CAUTION  

Observe in order to prevent electrical leakage, injury or property damage.

 

„

During use

• 

Small children or immobile persons (due to illness or injury) should not operate the 

unit by themselves.

• 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their safety.

 

Children should be supervised to ensure that they do not play with the appliance.

 

Persons who are heavily intoxicated or have taken sleep medication should not operate the unit. 

 

(An electric shock, injury or poor health may result)

• 

Do not use products that contain fine powder, such as cosmetics, near the unit. 

 

(An electric shock or malfunction may result)

• Do not operate the unit when fumigating insecticide is in use.

 

After using insecticide, be sure to sufficiently ventilate the room before operating the unit. 

 

(Harm may be caused to health from an outflow of accumulated chemical compounds from the outlet)

• 

Do not use the unit near a smoke detector.

 

If the air coming out of the unit flows in the direction of the smoke detector, the response of the smoke detector may 

be delayed or it may fail to detect smoke.

• Frequently ventilate the room when using the unit together with combustion-based 

heating devices.

 

Usage of this product is not a substitute for ventilation. (Potential cause of carbon monoxide poisoning) 

 

This product cannot eliminate carbon monoxide.

• 

If the unit is placed within reach of a pet, be careful that the pet does not urinate on 

the unit or chew on the power supply cord. 

(Fire, an electric shock or injury may result)

 

„

Concerning the unit body

• 

Do not block the air inlets or air outlet with laundry, cloth, curtains, etc. 

 

(Overheating or fire may result from poor circulation)

• 

Do not climb, sit or lean on the unit. 

(Injury may result from falling or toppling)

 

„

When moving the unit  

• 

When picking up the unit to move it, handle the unit with caution.

 

Be sure to always hold the unit using the correct grip locations. Do not hold the unit using 

the grip on the carbon filter unit. (Injury may result from the unit falling)

• 

Before moving the unit, turn off the power. 

Hold these grips

  

(2 places)

Do not hold 
this grip

Safety Precautions

01_EN_3P671617-2A.indd   5

2021/11/22   16:27:32

Summary of Contents for MCB50YSAU





























Reviews: